Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 145)

Network OS NETCONF Operations Guide 113
53-1003231-02
Zoning information
10
11:22:33:44:55:66:77:83
Retrieving the enabled configuration
In an effort to improve DCMD zoning performance, the enabled zone configuration is no longer
distributed in the DCMD database. This means that the zoning enabled-configuration can no longer
be retrieved using the show running-config zoning enabled-configuration command. Beginning with
Network OS 4.0.0, you must use a new RPC to display the enabled-configuration.
This new RPC includes pagination support with a default setting of 200 lines of config for each
zone request operation. You can retrieve the entire enabled zone configuration or retrieve a single
enabled zone, which also includes its underlying zone members.
To retrieve the entire enabled zone configuration, do not specify any input parameters and issue
the following:
xmlns="urn:brocade.com:mgmt:brocade-zone">
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
cfg1
zone1
10:00:00:00:00:00:00:01
10:00:00:00:00:00:00:02
zone2
10:00:00:00:00:00:00:03
10:00:00:00:00:00:00:04
false
To retrieve a single zone and its underlying members, specify the zone-name-pattern field and
issue the following: