Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 167)

Network OS NETCONF Operations Guide 135
53-1003231-02
Retrieving the Fibre Channel port configuration
11
To retrieve Fibre Channel configuration data for a specific Fibre Channel interface, use the following
filter.
8/0/1
To retrieve the settings of specific attributes for a given Fibre Channel port, use a filter such as the
following. In this case, just the configured port speed is retrieved.
8/0/1
The following example retrieves the configuration for the Fibre Channel port 1 on routing bridge 8.
8/0/1
8/0/1
8gbps
ld
arb
0
4