Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 166)

134 Network OS NETCONF Operations Guide
53-1003231-02
Fibre Channel port attributes
11
Fibre Channel port attributes
Network OS v4.0.0 allows you to configure and query the Fibre Channel port attributes listed in
Table 4 for an E_Port, using the NETCONF interface. The referenced XML elements that define the
attributes values for a specific port reside within an instance of the node, which in turn,
resides in the node in the urn:brocade.com:mgmt:brocade-interface.
The following Fibre Channel port attributes are not supported by Network OS version 3.0.0:
Retrieving the Fibre Channel port configuration
Use the RPC to query the Fibre Channel port configuration. You can retrieve the
configuration for all Fibre Channel ports, specific Fibre Channel ports, or specific attributes of
specific Fibre Channel ports. To select the data you want to retrieve, use an appropriate subtree
filter.
To retrieve the Fibre Channel configuration for all Fibre Channel interfaces configured on the
switch, use the following filter:
TABLE 4 Fibre Channel port attributes
Attribute Purpose XML element in
/
Port speed Defines the speed of the E_Port.
Fill word Configures the link initialization and fill word
primitives for an 8 GB Fibre Channel port.
Long distance mode Configures the port for long-distance
operations.
VC link init Configures the fill-word for long-distance
operations.
Desired distance Configures manually the distance for a long
distance connection.
Trunk port Configures the port for trunking.
Buffer credit control Enables interswitch link receiver ready (ISL
R_RDY) mode on the port. If ISL R_RDY is not
set, then ISL VC_RDY mode is set by default.
We recommend you do not set ISL R_RDY.
Port mode configuration Configure the port mode for the interface.
AL_PA offset 13
Compression
Credit Recovery
CSCTL mode
D-Port mode
Disabled E_Port
Encryption
EX_Port F_Port buffers
Fault Delay
FEC
Frame shooter port
Locked G_Port
Locked L_Port
LOS TOV enable
Mirror Port NPIV capability
NPIV PP Limit
Persistent Disable
Port Auto Disable
QoS E_Port
Rate limit
RSCN suppressed