Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 353)

Network OS NETCONF Operations Guide 321
53-1003231-02
Virtual Fabric configuration with NETCONF overview
23
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the interface type element (,
, , or ).
3. Under the , , , or
element, include the following elements:
a. In the element, specify the port name in [rbridge-id/]slot/port format.
b. Include the / elements to configure the port as a trunk Virtual Fabric
using the element.
c. Add the element and include the element.
d. Specify the value and the value.
The following example configures 10-Gigabit Ethernet port 1/0/1 as a trunk VLAN with a C-TAG
range.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
1/0/1
trunk
5001
10
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">