Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 576)

544 Network OS NETCONF Operations Guide
53-1003231-02
Enabling short-path forwarding (VRRP-E only)
35
tengigabitethernet
2/4
60
Enabling short-path forwarding (VRRP-E only)
For conceptual information about short-path forwarding, refer to the Network OS Administrator’s
Guide.
To enable short-path forwarding, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the // hierarchy of node
elements.
3. Under the node, include the element, and specify the VE name.
4. Under the node, include the node element from the
urn:brocade.com:mgmt:brocade-vrrp namespace.
5. Under the node, include the following leaf elements.
a. In the element, specify the group ID of the VRRP router group.
b. Include the empty element to enable short-path forwarding.
The following example enables short-path forwarding on VE interface 5.
5
100