Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 51)

Network OS NETCONF Operations Guide 19
53-1003231-02
Managing the configuration
2
The delete operation is used to remove or disable part of the configuration. The following example
disables MSTP on the managed device.
operation="delete"/>
Managing the configuration
Network OS provides the custom PRC for performing any of the following
operations:
• Copy the running-config file to the startup-config file.
• Copy the running-config file to a remote file.
• Copy the startup-config file to a remote file.
• Copy a remote file to the running-config file.
• Copy a remote file to the startup-config file.
Some simple examples are provided here. Refer to the Network OS Administrator’s Guide for the
following related information:
• General configuration management concepts
• Details and recommendations about how to apply these operations in a modular chassis or a
Brocade VCS Fabric
• How to perform management configuration using the Brocade Network OS command line
interface (CLI)