Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 66)

34 Network OS NETCONF Operations Guide
53-1003231-02
supportSave data
3
• (VCS Fabric mode only) In the field, specify the RBridge ID of the switch whose
supportSave data you want to save.
admin
10.38.33.131
/home/admin/support
h8F!@m
5
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="315">
5
success
Uploading supportSave to an external host using SCP
To upload supportSave data to an external host using SCP, issue the //
custom action located in the urn:brocade.com:mgmt:brocade-ras namespace. Under the
node, include the following leaf elements:
• In the and elements, provide valid login credentials for an account on the
SCP server.
• In the field, specify the IP address of the SCP server.
IPv6 addresses are valid only on Network OS 3.0.0 platforms.
• In the field, specify the path to the directory on the SCP server where you want to
store the supportSave data.
• (VCS Fabric mode only) In the field, specify the RBridge ID of the switch whose
supportSave data you want to save.
admin