Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 357)

Network OS NETCONF Operations Guide 325
53-1003231-02
Virtual Fabric configuration with NETCONF overview
23
Configuring an access Virtual Fabric with a MAC group
To configure the interface as an access Virtual Fabric interface requires two RPCs. The first RPC
configures the port as a Layer 2 interface; the second RPC configures the interface port as an
access Virtual Fabric with a MAC group.
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the interface type element (,
, , or ).
3. Under the , , , or
element, include the following elements:
a. In the element, specify the port name in [rbridge-id/]slot/port format.
b. In the element, include the delete operation in the element opening tag to
enable the interface port.
c. Include the / elements to configure the port as a Layer 2 interface.
d. Add the element and include the element.
e. Specify the value and the value.
The following example configures 10-Gigabit Ethernet port 1/0/1 as an access VLAN with a
MAC group.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
1/0/1
5001
1