Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 396)

364 Network OS NETCONF Operations Guide
53-1003231-02
Configuring all xSTP on DCB interface ports
24
operation="delete"/>
5
Specifying restrictions for an MSTP instance
Use this procedure to specify restrictions on the interface for an MSTP instance.
To specify restrictions for an MSTP instance on a DCB interface, perform the following steps.
1. Issue the RPC to configure the interface node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node element, include the following elements.
a. In the element, specify the interface name in [rbridge-id/]slot/port format or
port-channel number.
b. In the element, include the delete operation in the element tag to enable the
port.
c. Include the node element, which resides in the
urn:brocade.com:mgmt:brocade-xstp namespace.
4. Under the node, include the node element.
5. Under the node element, specify the following leaf elements.
a. In the element, set the instance ID.
b. Include the empty leaf element to specify the restrictions for the MSTP
instance on a DCB interface.
22/0/1
operation="delete"/>