Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 450)

418 Network OS NETCONF Operations Guide
53-1003231-02
IP ACL
28
5. Under the or node, include the node element located in either the
urn:brocade.com:mgmt:brocade-ip-access-list or
urn:brocade.com:mgmt:brocade-ipv6-access-list namespace, respectively.
6. Under the node, include the or
leaf node, and specify the name of the access list.
The following example applies stdV6ACL1 to the management interface.
3/1
xmlns="urn:brocade.com:mgmt:brocade-ipv6-access-list">
stdV6ACL1
Applying an IP ACL to a data interface
To apply the IP ACLs to a data interface, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element to
configure the data interface.
3. Under the , , ,
, or node, include the node and specify the
name of the data interface in [rbridge-id/]slot/port format, or port-number format for a
port-channel interface.
4. Under the , , ,
, or node, include the
hierarchy node elements located in the urn:brocade.com:mgmt:brocade-ip-access-list
namespace, respectively.
5. Under the node, include the node element.