beautypg.com

Configuring the iscsi profile – Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual

Page 432

background image

400

Network OS NETCONF Operations Guide

53-1003231-02

Configuring LLDP global options

27

UK_LLDP_IT

Standard profile by Jane

operation="delete"/>

10

2

Configuring the iSCSI profile

You can configure an iSCSI profile to be applied to individual interfaces. However, the priority bit
must be set explicitly for each interface.

To configure iSCSI profiles, you must first configure the CEE map, if one has not already been
created, configure the iSCSI profile, and then apply that profile to the interfaces.

To configure the CEE map, perform the following steps.

1. Issue an RPC to configure the node in the

urn:brocade.com:mgmt:brocade-cee-map namespace.

2. Under the node, include the element and set it to “default”—the only

currently supported name.

3. Under the node, include the list element once for each

priority-group table entry.

4. Under each node, include the following leaf elements: