Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 533)

Network OS NETCONF Operations Guide 501
53-1003231-02
Configuring RSPAN
32
4. Under the node, set the value to to make the VLAN remote.
1010
5. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-span namespace.
6. Under the node, include the node element.
7. Under the node, include the following leaf elements.
a. In the field, identify the session with a unique session number.
b. Optional: In the field, provide a descriptive text for the session.
8. Under the node, include the node element.
9. Under the node, include the following leaf elements.
a. In the element, specify “source” to designate subsequent parameters as
pertaining to the source port.
b. In the element, specify “tengigabitethernet”,
“fortygigabitethernet”, or “gigabitethernet”, depending on the source port type.
c. In the element, specify the source port in
[rbridge-id/]slot/port format.
d. In the element, specify “destination” to designate subsequent parameters
as pertaining to the destination port.
e. In the element, specify “tengigabitethernet”,
“fortygigabitethernet”, or “gigabitethernet”, depending on the destination port type.
f. In the element, specify the destination port in VLAN format.
g. In the element, specify “both” to configure bidirectional SPAN.