Adding additional members to an existing alias – Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual
Page 138

106
Network OS NETCONF Operations Guide
53-1003231-02
Zone aliases
10
Adding additional members to an existing alias
1. Issue the
urn:brocade.com:mgmt:brocade-nameserver namespace to list the WWNs of devices and
targets available in the Brocade VCS Fabric. The available WWNs appear in the
fields in the reply message.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="605"> (output truncated) (output truncated) 2. Issue the urn:brocade.com:mgmt:brocade-zone namespace, and specify the following elements. a. Under the b. Under the c. Under the of the alias to which you want to add a member. d. Under the e. Under the value to a WWN returned in the output of the f. Repeat for each additional member you want to add to the alias. g. Under the h. Under the its value to “cfg-save”, to save the configuration to nonvolatile memory. The following example adds two member nodes to an alias.
issued in