Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 511)

Network OS NETCONF Operations Guide 479
53-1003231-02
Interface-specific administrative tasks for 802.1x
30
3. Under the , , , or
node, include the leaf element and specify the name of
the interface on which you want to configure 802.1x re-authentication. Specify the interface in
[rbridge-id/]slot/port format.
4. Under the , , , or
node, include the node element from the
urn:brocade.com:mgmt:brocade-dot1x namespace.
5. Under the node, include the empty leaf element to enable 802.1x
authentication on the interface.
6. Under the node, include the empty leaf element to enable
802.1x re-authentication on the interface.
7. Optional: Under the element, include the node element.
8. Optional: Under the node, include the , and specify a new timeout
value.
9. Issue the RPC to save the running-config file to the startup-config file.
The following example sets reauthorization for the 10 gigabit Ethernet 22/0/1 interface and sets
the reauthorization timer to 4000 seconds.
22/0/1
4000
Configuring 802.1x port-control on specific interface ports
You can set 802.1x port-control on an interface to one of the following states:
• auto—802.1x authentication is enabled. The port moves to the authorized state only after
successful authentication. “auto” is the default value.