Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 62)

30 Network OS NETCONF Operations Guide
53-1003231-02
Interfaces, slots, and modules
3
The example RPCs shown in the following procedure replace the card in slot 1 with a LC48x10G
module. These examples assume VCS Fabric mode. For standalone mode, replace the
/ node elements with the node element.
1. Power off the interface module by issuing the / custom action
located in the urn:brocade.com:mgmt:brocade-linecard-management namespace.
xmlns="urn:brocade.com:mgmt:brocade-linecard-management">
1
2. Clear the slot configuration.
5
xmlns="urn:brocade.com:mgmt:brocade-linecard-management">
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
operation="delete">
1
3. Remove the interface module.
4. Specify the new line card type.