Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 111)

Network OS NETCONF Operations Guide 79
53-1003231-02
SNMP server hosts
7
dns1.mycorp.com
snmpuser3
Removing the SNMP server host
To remove version 2c from the host and replace it with version 1, perform the following steps.
1. Issue the RPC to configure the / node in the
urn:brocade:com:mgmt:brocade-snmp workspace and specify the following leaf elements.
2. Under the node, include the node element.
3. Under the node, include the following leaf elements.
a. In the leaf element, specify the IPv4, IPv6, or DNS address of the SNMP host.
b. In the leaf element, specify the community string associated with the host.
c. In the element, include the delete operation in the opening tag.
Deleting the version restores the default value of version 1.
10.32.147.6
public
operation="delete">2c
To remove the SNMP host from the switch configuration altogether, place the delete operation in
the opening tag of the element.