Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 280)

248 Network OS NETCONF Operations Guide
53-1003231-02
Configuring AMPP port-profiles
19
5111
111
Adding a C-TAG classification to a native VLAN
This tasks demonstrates adding a C-TAG range to an existing native VLAN port-profile. In this
example, the native VLAN port-profile named “PROFILE_1”.
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-port-profile namespace.
2. Under the node, specify the element.
3. Under the element, include the following elements:
a. In the element, specify the profile name.
b. Include the elements to configure the profile as a trunk VLAN using the
element.
c. Add the element and include the and
elements.
d. Specify the value and the value.
The following example configures a native VLAN with a C-TAG range.
PROFILE_1