Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 67)

Network OS NETCONF Operations Guide 35
53-1003231-02
supportSave data
3
10.38.33.131
/home/admin/support
h8F!@m
5
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="316">
5
success
Saving supportSave data to an attached USB device
You can use a Brocade-branded USB device to save the support data. The Brocade-branded USB
device comes with factory-configured default directories and interacts with the Network OS CLI.
1. To enable the USB device, issue the // custom action located in the
urn:brocade.com:mgmt:brocade-ras namespace.
In the VCS Fabric mode only, include the leaf element under the node and
specify the routing bridge on which you want to enable the USB device.
27
2. To display the default directories, issue the //
the urn:brocade.com:mgmt:brocade-ras namespace.
In the VCS Fabric mode only, include the leaf element under the