Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 600)

568 Network OS NETCONF Operations Guide
53-1003231-02
Configuring DHCP Relay
39
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node, include the element and set its
value to the name of the interface for which you want to configure user-priority mappings.
4. Under the , , ,
, or node, include the element located in
the urn:brocade.com:mgmt:brocade-dhcp namespace.
5. Set the node to the IP address for the DHCP server.
1/3/1
100.1.1.2
The following is an example of configuring the same IP DHCP Relay address, except this time on VE
interface 100.
100
100.1.1.2