Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 294)

262 Network OS NETCONF Operations Guide
53-1003231-02
Obtaining the AMPP operational data
19
With no input parameters, the RPC returns information about all AMPP
profiles in all states. Alternatively, you can specify the element in the input to
restrict the returned information to one port-profile. You can also specify the
parameter to restrict the returned information to port-profiles in a specific state; applied, activated,
or associated.
One invocation of the RPC returns information for one MAC association for
a given port-profile. To return multiple MAC associations, you must issue the RPC multiple times,
and make use of the input parameter, which has two leaf
elements: and .
On the first invocation of the RPC, set the
/ element to 00:00:00:00:00:00. If the
element in the reply is true, use the MAC address returned in the element in the output as
the / element in the input of the next call to the
RPC. All port-profile information has been returned when the
output element returns false.
The following example returns status for the auto-VM_Network port-profile for all MAC associations
in the activated state. In the first call, the / element is set
to 00:00:00:00:00. The output returns the first associated MAC address and the
element is set to true.
xmlns="urn:brocade.com:mgmt:brocade-port-profile-ext">
auto-VM_Network
activated
auto-VM_Network
00:00:00:00:00:00
auto-VM_Network
9
true
00:50:56:b3:00:01
tengigabitethernet
9/0/53
true
The following example takes as input the MAC association returned by the previous call. The output
returns the next MAC association for this port-profile.
xmlns="urn:brocade.com:mgmt:brocade-port-profile-ext">
auto-VM_Network
activated