Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 487)

Network OS NETCONF Operations Guide 455
53-1003231-02
Data Center Bridging map configuration
29
4. Under the node, include a n> node for each traffic class, and set
each such element to a percentage bandwidth.
5. Issue the RPC to save the running-config file to the startup-config file.
The following example schedules the QoS multicast queue with bandwidth percentages 5, 10, 15,
20, 5, 10, 15, and 20 for Traffic Classes 0 through 7, respectively.
5
10
15
20
5
10
15
20
Data Center Bridging map configuration
For an overview of Data Center Bridging map configuration and applicable default values, refer to
the Network OS Administrator’s Guide.
Creating a CEE map
To create a CEE map, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-cee-map namespace, and set the element to
“default,” which is the only allowed name.
2. Issue the RPC to save the running-config file to the startup-config file.