Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 214)

182 Network OS NETCONF Operations Guide
53-1003231-02
Command access rules
15
Deleting a role
To delete a role, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-aaa namespace.
2. Under the node, include the node element, and include the delete operation in
the element tag.
3. Under the node, include the leaf element and specify the name of the role
you want to delete.
operation="delete">
VLANAdmin
Command access rules
Command authorization is defined in terms of an ordered set of rules that are associated with a
role. Rules define and restrict a role to access modes (read-only or read-write access), and beyond
that can define permit or reject on specified command groups or individual commands. You can
associate multiple rules with a given user-defined role, but you can only associate one role with any
given user account.
To specify a rule, you must specify at least three mandatory attributes: a rule index number, the role
to which the rule should apply, and the command that is defined by the rule.
Table 7 describes the
rule attribute details.
TABLE 7 Rule attributes
Parameter Description
index A numeric identifier of the rule in the range between 1 and 512.
role The name of the role for which the rule is defined.
command The command for which access is defined.