Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 240)

208 Network OS NETCONF Operations Guide
53-1003231-02
TACACS+
16
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-aaa workspace.
2. Under the node, include the node element.
3. Under the node, include the element, and leaf elements that define the
parameters you want to set.
The following example adds a TACACS+ server with an IPv6 address and sets the protocol and
key values.
fec0:60:69bc:94:211:25ff:fec4:6010
chap
new#hercules*secret
4. Issue the RPC with a subtree filter to limit the output to information about the
TACACS+ server to verify the configuration.
fec0:60:69bc:94:211:25ff:fec4:6010
fec0:60:69bc:94:211:25ff:fec4:6010
49
chap
new#hercules*secret
5