Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 148)

116 Network OS NETCONF Operations Guide
53-1003231-02
Zone creation and management
10
zoneD
11:22:33:44:55:66:77:80
11:22:33:44:55:66:77:84
cfg-save
Adding a member to a zone
The following procedure adds a WWN to a zone and saves the modified zoning configuration to
nonvolatile memory. Up to 255 zone member objects are supported for each zone.
1. Issue the RPC to configure the // node
in the in the urn:brocade.com:mgmt:brocade-zone namespace and specify the following
elements:
a. In the element, provide the name of the zone to which you want to add a
WWN.
b. In a element, provide an element containing the WWN you
want to add to the zone.
The WWN can be a node WWN or a port WWN.
2. Issue the RPC on the / node and set the value
of the element to “cfg-save” to save the modified configuration to nonvolatile
memory.
The following example adds a WWN to an existing zone.
?xml version="1.0" encoding="UTF-8"?>
zoneD
11:22:33:44:55:66:77:85