Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 352)

320 Network OS NETCONF Operations Guide
53-1003231-02
Virtual Fabric configuration with NETCONF overview
23
a. In the element, specify the port name in [rbridge-id/]slot/port format.
b. Include the / elements to configure the port as a trunk Virtual Fabric
using the element.
c. Add the element and include the element.
d. Specify the value and the value.
The following example configures 10-Gigabit Ethernet port 1/0/1 as a trunk VLAN with a C-TAG
range.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
1/0/1
trunk
6011
51-68
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
Configuring a trunk Virtual Fabric with a single C-TAG.
When configuring a trunk Virtual Fabric with a single C-TAG on the interface, it is important to
remember that the C-TAG is applicable only for a trunk VLAN.
Configuring the trunk Virtual Fabric requires two RPCs. The first RPC configures the port as a Layer
2 interface; the second RPC configures the Virtual Fabric with a trunk classification and the C-TAG.