Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 277)

Network OS NETCONF Operations Guide 245
53-1003231-02
Configuring AMPP port-profiles
19
a. Under the node, specify the name of the port-profile:
vm1-port-profile
b. Under the node, use the element to specify the VLAN
subprofile.
c. Under the node, specify the node to change the mode to
Layer 2 and set the switching characteristics.
d. Under the node, access the VLAN profile mode for the correct VLAN.
200
e. Under the node, configure the trunk mode for the allowed VLAN IDs.
10,20,30-40
f. Under the node, configure the trunk mode to be a native VLAN.
300
The following example configures the VLAN profile.
vm1-port-profile
200
10,20,30-40