beautypg.com

Configuring the transmit frequency of lldp frames – Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual

Page 426

background image

394

Network OS NETCONF Operations Guide

53-1003231-02

Configuring LLDP global options

27

tx

To enable both transmit and receive modes, delete the element by including the delete
operation in its tag.

operation="delete"/>

Configuring the transmit frequency of LLDP frames

The default transmit frequency is 30 seconds. The valid range is 4 through 180 seconds.

To configure the transmit frequency of LLDP frames, perform the following steps.

1. Issue the RPC to configure the node in the

urn:brocade.com:mgmt:brocade-interface namespace.

2. Under the node, include the node element, which resides in the

urn:brocade.com:mgmt:brocade-lldp namespace.

3. Under the node, include the leaf element, and set its value to the number of

seconds between the transmission of LLDP frames.

The following example sets the transmit frequency to 45 seconds.