Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 489)

Network OS NETCONF Operations Guide 457
53-1003231-02
Data Center Bridging map configuration
29
Defining a priority-table map
To define a priority-table map, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-cee-map namespace.
2. Under the node, identify the CEE map in the element.
The only value map name is “default.”
3. Under the node, include the node.
4. Under the node, include a n-pgid> element for each Class of Service,
and set the value of the element to the ID of the priority group table to which you want to map
the Class of Service.
5. Issue the RPC to save the running-config file to the startup-config file.
The following example maps CoS 0 through CoS 2 and CoS 4 through CoS 6 to PGID 1, CoS 3 to
PGID 0, and CoS 7 to PGID 15.0.
default
1
1
1
0
1
1
1
15.0