Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 507)

Network OS NETCONF Operations Guide 475
53-1003231-02
802.1x authentication configuration tasks
30
Before running the readiness check, you can set a timeout value in seconds. The default timeout
value is 10 seconds. To configure a readiness check timeout value, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-dot1x namespace.
2. Under the node, include the node element.
3. Under the node, include the leaf element and set a value in seconds for the
readiness check timeout.
4. Issue the RPC to save the running-config file to the startup-config file.
40
Disabling 802.1x globally
To disable 802.1x authentication globally, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-dot1x namespace.
2. Under the node, include the element, and include the delete operation in
the element tag.
3. Issue the RPC to save the running-config file to the startup-config file.
operation="delete"/>