Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 271)

Network OS NETCONF Operations Guide 239
53-1003231-02
Edge-loop detection troubleshooting
18
NOTE
If an edge-port becomes an ISL port because the VCS ID of the remote port was changed, a port that
was already shut down by ELD must be shut down and re-enabled to be detected as an ISL port.
To re-enable all ports disabled by ELD, disable the edge-loop detection protocol, as shown in the
following example.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
operation="delete">