Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 423)

Network OS NETCONF Operations Guide 391
53-1003231-02
Configuring LLDP global options
27
operation="delete"/>
To disable LLDP globally, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node element from the
urn:brocade.com:mgmt:brocade-lldp namespace.
3. Under the node element, include the leaf element.
The following example disables LLDP globally.
Configuring LLDP global options
The global LLDP configuration options are located under the / node in the
urn:brocade.com:mgmt:brocade-lldp namespace.
Specifying a system name and LLDP description
The global system name for LLDP is useful for differentiating among switches. By default, the
“host-name” from the chassis/entity MIB is used. By specifying a descriptive system name, you will
find it easier to configure the switch for LLDP.
The system description is seen by neighboring switches.