Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 399)

Network OS NETCONF Operations Guide 367
53-1003231-02
Configuring all xSTP on DCB interface ports
24
22/0/1
operation="delete"/>
Specifying the port priority
Use this procedure to specify the port priority. The range is 0 through 240 in increments of 16. The
default is 128. A lower number designates a higher priority.
To specify the port priority on the DCB interface, perform the following steps.
1. Issue the RPC to configure the interface node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node element, include the following elements.
a. In the element, specify the interface name in [rbridge-id/]slot/port format or
port-channel number.
b. In the element, include the delete operation in the element tag to enable the
port.
c. Include the node element, which resides in the
urn:brocade.com:mgmt:brocade-xstp namespace.
4. Under the node, include the leaf element and specify the port
priority.