Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 386)

354 Network OS NETCONF Operations Guide
53-1003231-02
Spanning tree configuration and management
24
4. Under the node, include the element and specify an MSTP region.
sydney
Specifying a revision number for MSTP configuration
Use this procedure to specify a revision number for an MSTP configuration. The range is 0 through
255. The default is 0.
To specify a revision number for an MSTP configuration, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node from the
urn:brocade.com:mgmt:brocade-xstp namespace.
3. Under the node, include the node element.
4. Under the node, include the element and specify a revision number for an
MSTP configuration.
17