Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 105)

Network OS NETCONF Operations Guide 73
53-1003231-02
Chapter
7
SNMP
In this chapter
• SNMP management with NETCONF overview . . . . . . . . . . . . . . . . . . . . . . . . 73
• SNMP community strings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
• Obtaining SNMP user names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
• SNMP server hosts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
• Support for multiple SNMP server contexts . . . . . . . . . . . . . . . . . . . . . . . . . 82
• Support for password encryption for SNMPv3 users . . . . . . . . . . . . . . . . . . 83
SNMP management with NETCONF overview
This chapter provides procedures and examples for Brocade SNMP management using the
NETCONF interface. Refer to the Network OS Administrator’s Guide for the following related
information:
• A conceptual overview of concepts related to SNMP
• Guidelines and restrictions regarding SNMP
• How to perform SNMP management using the Network OS command line interface
Using the NETCONF interface, you can perform the following fabric configuration operations:
• Use the remote procedure call (RPC) to perform the following operations:
- Enable and disable SNMP community strings
- Configure SNMP server hosts
- Enable and disable fabric trunking
- Configure multiple SNMP server contexts
- Configure the VCS Fabric virtual IP address
- Configure password encryption for SNMPv3 users
• Use the RPC to verify all or part of the SNMP configuration.
• Use the custom RPC to return configuration state information about SNMP.
Brocade SNMP parameters are defined in the brocade-snmp YANG module. For structural maps of
this YANG module, refer to the Network OS YANG Reference Manual.