Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 470)

438 Network OS NETCONF Operations Guide
53-1003231-02
Queueing
29
To map a CoS to a Traffic-Class, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-qos namespace.
2. Under the node, include the node element.
3. Under the node, include the node element.
4. Under the node, include the following leaf elements.
a. In the element, give a name to the map.
b. In each successive n> element, set a traffic-class value for each outbound CoS class.
For example, the following element maps a traffic class value of 3 for all packets with
outbound CoS value of 3.
3
5. Issue the RPC to save the running-config file to the startup-config file.
The following example specifies a CoS-to-traffic-class mapping for a map named “test.”
test
1
0
2
3
4
5
6
7
Applying a CoS-to-Traffic-Class mapping to an interface
To apply a CoS-to-traffic class mapping, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.