Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 313)

Network OS NETCONF Operations Guide 281
53-1003231-02
VLAN configuration and management
21
1. To select the type of STP, issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace, and specify the following elements.
a. Under the node, specify the node element in the
urn:brocade.com:mgmt:brocade-xstp namespace.
b. Under the node element, specify the node element.
c. Under the node, specify the leaf element, and include the delete
operation in the opening tag to enable MSTP.
2. To enable spanning tree on the VLAN, issue an RPC to configure the
node in the urn:brocade.com:mgmt:brocade-interface namespace, and
specify the following elements:
a. Under the node, specify the / hierarchy of node
elements.
b. Under the element, specify the element and set it to the VLAN ID.
c. Under the element, specify the node element in the
urn:brocade.com:mgmt:brocade-xstp namespace.
d. Under the node, include the element, and include the
delete operation in the opening tag to enable STP on the VLAN.
The following example enables MSTP on VLAN 1002 using one RPC.
operation="delete"/>
1002
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
operation="delete"/>