beautypg.com

Mapping a vlan to an mstp instance – Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual

Page 384

background image

352

Network OS NETCONF Operations Guide

53-1003231-02

Spanning tree configuration and management

24

disable

Mapping a VLAN to an MSTP instance

Use the this procedure to map a VLAN to an MTSP instance. You can group a set of VLANs to an
instance. This element can be mapped only after the VLAN is created. Refer to

“Creating a

VLAN interface”

on page 280. VLAN instance mapping is removed from the configuration if the

underlying VLANs are deleted.

To map a VLAN to an MSTP instance, perform the following steps.

1. Issue the RPC to configure the node in the

urn:brocade.com:mgmt:brocade-interface namespace.

2. Under the node, include the node from the

urn:brocade.com:mgmt:brocade-xstp namespace.

3. Under the node, include the node element.

4. Under the node element, include the node element.

5. Under the node, include the following leaf elements.

a. In the element, specify the MSTP instance ID.

b. In the element, specify a VLAN to map to the MSTP instance.

5

300