Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 407)

Network OS NETCONF Operations Guide 375
53-1003231-02
Configuring UDLD
25
Disabling UDLD
To disable UDLD, perform the following steps.
1. 1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the shutdown for the node element from the
urn:brocade.com:mgmt:brocade-udld namespace.
3. Under the node element, include the leaf element. The following example
disables UDLD.
Retrieving UDLD statistics
Use the RPC to retrieve the current configuration data and operational state data.
Refer to
“Retrieving configuration data” on page 11 and “Retrieving operational data” on page 15
for detailed instructions.