Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 478)

446 Network OS NETCONF Operations Guide
53-1003231-02
Congestion control
29
Configuring CoS thresholds
To configure CoS thresholds, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the or node
element.
3. Under the or node, include the leaf element
and specify the interface name for which you want to configure CoS thresholds
([rbridge-id/]slot/port format).
4. Under the or node, include the node element
from the urn:brocade.com:mgmt:brocade-qos namespace.
5. Under the node, include the / node element hierarchy.
6. Under the node, specify percentage values for each CoS value in a
n-threshold> element.
7. Issue the RPC to save the running-config file to the startup-config file.
The following example uses the priorities 5, 5, 5, 5, 50, 20, 2, and 8, which adds up to 100%.
22/0/1
5
5
5
5
50
20
2
8