Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 45)

Network OS NETCONF Operations Guide 13
53-1003231-02
Retrieving configuration data
2
8/0/1
If all you want to know is the setting of one specific Fibre Channel port attribute, such as the
configured speed, use a filter such as the following. In this case, suppresses the
inclusion of all its sibling nodes. It is termed a selection node.
8/0/1
The following example retrieves the configuration for the Fibre Channel port 1 on routing bridge 8.
8/0/1
8/0/1
1
8gbps
ld
arb
0