Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 311)

Network OS NETCONF Operations Guide 279
53-1003231-02
VLAN configuration and management
21
22/0/1
Configuring the MTU on an interface port
To configure the maximum transmission unit (MTU) on an interface port, perform the following
steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the element, specify the interface type element (,
, , or ).
3. Under the , , , or
element, include the following elements.
a. In the element, specify the port name in [rbridge-id/]slot/port format.
b. In the element, include the delete operation in the opening tag to enable the
interface port.
c. In the element, set the new MTU value for the interface port.
The following example enables port 22/0/1 and sets its MTU value to 4200.
22/0/1
operation="delete"/>
4200