Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 524)

492 Network OS NETCONF Operations Guide
53-1003231-02
Flow-based sFlow
31
1/0/1
new_policy-map
Disabling flow-based sFlow on specific interfaces
NOTE
Disabling sFlow on the interface port does not completely shut down the network communication on
the interface port.
To disable sFlow on a specific interface, perform the following steps in interface configuration
mode.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the empty element and specify the delete
operation in the element tag to disable sFlow on the interface.
switch# show sflow interface tengigabitethernet 0/12
operation="delete"/>