Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 490)

458 Network OS NETCONF Operations Guide
53-1003231-02
Data Center Bridging map configuration
29
Applying a CEE provisioning map to an interface
To apply a CEE provisioning map to an interface, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node, include the following leaf elements.
a. In the element, specify the name of the interface to which you want to apply the
CEE map. Specify the name in the format [rbridge-id/]slot/port or port-channel number.
b. In the element, specify the name of the CEE map. The only valid CEE map name is
“default.”
4. Issue the RPC to save the running-config file to the startup-config file.
22/0/2
default
Verifying the CEE maps
To verify the CEE map, issue the RPC with a subtree filter to return the CEE default
map information.
default