Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 309)

Network OS NETCONF Operations Guide 277
53-1003231-02
Chapter
21
Configuring VLANs
In this chapter
• VLAN configuration with NETCONF overview . . . . . . . . . . . . . . . . . . . . . . . . 277
• VLAN configuration and management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
• Configuring protocol-based VLAN classifier rules . . . . . . . . . . . . . . . . . . . . 289
• Configuring the MAC address table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
• Private VLANs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
VLAN configuration with NETCONF overview
This chapter provides procedures for configuring VLANs using the NETCONF interface. Refer to the
Network OS Administrator’s Guide for the following related information:
• An overview of VLANs
• An explanation of how ingress VLAN filtering works
• Conceptual information about VLAN classifications
• VLAN configuration guidelines and restrictions
• The default VLAN configuration
• Overview of Private VLANs
Through the NETCONF interface, you can perform the following operations on VLANs:
• Use the RPC to configure VLANs.
• Use the RPC to validate configuration settings.
• Use the custom RPC to return information about a VLAN-associated port
interface.
• Use the custom RPC to return information about a specific VLAN.
VLAN parameters are defined in the brocade-interface and brocade-vlan YANG modules. For
structural maps of these YANG modules, refer to the Network OS YANG Reference Manual. For
definitions and explanations of all VCS Fabric management parameters, refer to the
brocade-interface.yang, and brocade-vlan.yang files.
VLAN configuration and management
NOTE
Use the RPC to save your configuration changes.