Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 259)

Network OS NETCONF Operations Guide 227
53-1003231-02
Device authentication configuration
17
dh-chap
2
md5
off
Activating the authentication policy
To activate the authentication policy, set the switch policy state to “on” by performing the following
steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-fc-auth namespace.
2. Under the node, include the node element.
3. Under the node, include the node element.
4. Under the node, include the leaf element and set the switch policy state to
“on”.
on