Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 238)

206 Network OS NETCONF Operations Guide
53-1003231-02
RADIUS
16
10.38.37.180
1812
pap
changedesc
5
3
Removing a RADIUS server from a client’s server list
To remove a RADIUS server from a client’s server list, follow these steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-aaa namespace.
2. Under the node, include the node element, and include the delete
operation in the element tag.
3. Under the node, include the element and specify the domain name, IP
address, or IPv6 address of the RADIUS server you want to remove.
operation="delete">
10.38.37.180
Configuring the client to use RADIUS for login authentication
After configuring the client-side RADIUS server list, you must set the authentication mode so that
RADIUS is used as the primary source of authentication. Refer to
“Login authentication mode” on
page 198 for information on how to configure the login authentication mode.