Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 260)

228 Network OS NETCONF Operations Guide
53-1003231-02
Switch Connection Control policy configuration
17
5. Issue the RPC with a subtree filter to return the contents of the
// node in the urn:brocade.com:mgmt:brocade-fc-auth namespace to
return and verify the switch policy state.
Switch Connection Control policy configuration
This section provides procedures to create, modify, activate, and remove a defined Switch
Connection Control (SCC) policy.
Creating a defined SCC policy
The following procedure creates an SCC policy, adds members, and verifies the configuration.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-fc-auth namespace.
2. Under the node, include the / hierarchy of node
elements.
3. Under the node, include the leaf element and set its value to
“SCC_POLICY”.
4. Under the node, include a node element for each WWN to which
you want the SCC_POLICY to apply.
5. Under each node, include a leaf element, and set its value to the
WWN of the device to which you want to apply the policy.
6. To verify the configuration, issue a RPC with a subtree filter to return only the
node under the node of the
urn:brocade.com:mgmt:brocade-fc-auth namespace.
The following example creates an SCC policy and adds 10:00:00:05:1e:00:69:00 and
22:22:22:22:22:22:22:22 as member nodes.
SCC_POLICY
10:00:00:05:1e:00:69:00
22:22:22:22:22:22:22:22