Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 356)

324 Network OS NETCONF Operations Guide
53-1003231-02
Virtual Fabric configuration with NETCONF overview
23
Configuring access Virtual Fabric on interfaces
To configure the interface as an access Virtual Fabric interface requires two RPCs. The first RPC
configures the port as a Layer 2 interface; the second RPC configures the interface port as an
access Virtual Fabric with a MAC address.
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the interface type element (,
, , or ).
3. Under the , , , or
element, include the following elements:
a. In the element, specify the port name in [rbridge-id/]slot/port format.
b. In the element, include the delete operation in the element opening tag to
enable the interface port.
c. Include the / elements to configure the port as a Layer 2 interface.
d. Add the element and include the element.
e. Specify the value and the value.
The following example configures 10-Gigabit Ethernet port 1/0/1 as an access VLAN.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
1/0/1
5002
000a.000b.0002
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">