Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 65)

Network OS NETCONF Operations Guide 33
53-1003231-02
supportSave data
3
Please do not disturb the setup on this switch
supportSave data
If you are troubleshooting a production system, you will have to capture data for further analysis or
send the data to your switch service provider. The / custom action located in the
urn:brocade.com:mgmt:brocade-ras namespace provides a mechanism for capturing critical
system data and uploading the data to an external host or saving the data to an attached USB
device.
Uploading supportSave data to an external host interactively
To upload supportSave data interactively, issue the / action located in
the urn:brocade.com:mgmt:brocade-ras namespace.
The switch responds with a dialog for accessing and uploading to the external host.
Uploading supportSave to an external host using FTP
To upload supportSave data to an external host using FTP, issue the //
custom action located in the urn:brocade.com:mgmt:brocade-ras namespace. Under the
node, include the following leaf elements:
• In the and elements, provide valid login credentials for an account on the
FTP server.
• In the field, specify the IP address of the FTP server.
IPv6 addresses are valid only on Network OS 3.0.0 platforms.
• In the field, specify the path to the directory on the FTP server where you want to
store the supportSave data.