Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 575)

Network OS NETCONF Operations Guide 543
53-1003231-02
Configuring the track priority
35
Configuring track priority for a VE link interface
To configure the track priority for a VE interface, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the / hierarchy of node elements,
3. Under the node, include the element, and specify the VE name.
4. Under the node, include the or node element located in the
urn:brocade.com:mgmt:brocade-vrrp namespace.
5. Under the or node, include the element and specify the group ID of the
VRRP router group.
6. Under the or node, include the node element.
7. Under the node, include the following leaf elements.
a. In the element, specify the type of interface to be tracked. This type can
be tengigabitethernet, gigabitethernet, fortygigabitethernet, or port-channel.
b. In the element, specify the name of the physical uplink interface to be
tracked in [rbridge-id/]slot/port format or port-channel number.
c. In the element, specify the reduction in priority that the interface specified
in step 3 will have if the tracked interface goes down.
The following example reduces the priority of interface 101/1/6 by 60 if physical interface 2/4
goes down.
6
1